Annular cutters, LZTS

TCT, Weldon 19 + Nitto shank

Carbide tipped core drills are suitable for all types of steels (including stainless and hardened steels), cast iron and non-ferrous metals.

Request a quote
Annular cutters

Technical data

d1,mm Article L, mm Shank Suitable ejector pins Eject pin size
12 LZTS-012 30 Weldon 19 + Nitto LZEP-6090 6,34×90
13 LZTS-013 30 Weldon 19 + Nitto LZEP-6090 6,34×90
14 LZTS-014 30 Weldon 19 + Nitto LZEP-6090 6,34×90
15 LZTS-015 30 Weldon 19 + Nitto LZEP-6090 6,34×90
16 LZTS-016 30 Weldon 19 + Nitto LZEP-6090 6,34×90
17 LZTS-017 30 Weldon 19 + Nitto LZEP-6090 6,34×90
18 LZTS-018 30 Weldon 19 + Nitto LZEP-7090 7,98×90
19 LZTS-019 30 Weldon 19 + Nitto LZEP-7090 7,98×90
20 LZTS-020 30 Weldon 19 + Nitto LZEP-7090 7,98×90
21 LZTS-021 30 Weldon 19 + Nitto LZEP-7090 7,98×90
22 LZTS-022 30 Weldon 19 + Nitto LZEP-7090 7,98×90
23 LZTS-023 30 Weldon 19 + Nitto LZEP-7090 7,98×90
24 LZTS-024 30 Weldon 19 + Nitto LZEP-7090 7,98×90
25 LZTS-025 30 Weldon 19 + Nitto LZEP-7090 7,98×90
26 LZTS-026 30 Weldon 19 + Nitto LZEP-7090 7,98×90
27 LZTS-027 30 Weldon 19 + Nitto LZEP-7090 7,98×90
28 LZTS-028 30 Weldon 19 + Nitto LZEP-7090 7,98×90
30 LZTS-030 30 Weldon 19 + Nitto LZEP-7090 7,98×90
32 LZTS-032 30 Weldon 19 + Nitto LZEP-7090 7,98×90
33 LZTS-033 30 Weldon 19 + Nitto LZEP-7090 7,98×90
34 LZTS-034 30 Weldon 19 + Nitto LZEP-7090 7,98×90
35 LZTS-035 30 Weldon 19 + Nitto LZEP-7090 7,98×90
36 LZTS-036 30 Weldon 19 + Nitto LZEP-7090 7,98×90
37 LZTS-037 30 Weldon 19 + Nitto LZEP-7090 7,98×90
38 LZTS-038 30 Weldon 19 + Nitto LZEP-7090 7,98×90
40 LZTS-040 30 Weldon 19 + Nitto LZEP-7090 7,98×90
50 LZTS-050 30 Weldon 19 + Nitto LZEP-7090 7,98×90
60 LZTS-060 30 Weldon 19 + Nitto LZEP-7090 7,98×90

Application ejector pins 2-piece

Why using 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used, you need for drill depths above 50 mm 2-part ejector pins.

Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling.